Futuranet

DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

Soldering station with digital temperature control between 160°C and 480°C and indication through display.

With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

Stick with Neopixel technology with 8 RGB LEDs that can be individually managed, each of which can produce 256 shades of its own color, determining a total of 16,777,216 colors. The data channel f...

It can function as an RFID card reader/writer, NFC reader with Android smartphone and in wireless mode with two identical devices. It can be used with Arduino to create access control devices. The...

Based on the ESP8266 Wi-Fi transceiver module and the CH340 USB converter chip, this compact (Open Source) development and prototyping board is ideal for IoT applications. The Wi-Fi module is comp...

Ideal for use with experimental boards!

This is a Neopixel technology ring with 12 RGB LED diodes that can be individually controlled, each of which can produce 256 shades of its own color, resulting in a total of 16,777,216 colors. The ...

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects imp...

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino.  You can set the refresh frequency as desired to make certain light effects i...

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects im...

A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

Extremely flexible, even after folded it always returns to its original shape. Dimensions 450 x 300 mm. Make your soldering and repair work easy with this multifunctional mat. ESD-Safe Heat-res...

A small photovoltaic panel, ideal for conducting experiments with solar energy.

It allows to provide the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible. Attention! use onl...

Also ideal for adjusting the brightness of LED lights and strips.

Transparent plastic box containing 50 heat shrinkable sleeves with a tin ring and two adhesive rings inside. Shrinkage ratio: 2:1 Working temperature: from -55°C to +105°C Complete tin melting...