{"product_id":"arduino-zero","title":"Arduino Zero","description":"\u003cp\u003eThe Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application development.  The Zero applications span from smart IoT devices, wearable technology, high-tech automation, to crazy robotics. The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit\n\nARM® Cortex® M0+ core. One of its most important features is Atmel’s Embedded Debugger (EDBG), which provides a full debug interface without the need for additional hardware, significantly increasing the ease-of-use for software debugging. EDBG also supports a virtual COM port that can be used for device and bootloader programming.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarning: Unlike most Arduino boards, the Zero runs at 3.3V. The maximum voltage that the I\/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I\/O pin could damage the board.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Zero is compatible with all the shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.\u003c\/p\u003e\n\n\u003cp\u003eYou can find your board warranty information \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/www.arduino.cc\/en\/Main\/warranty\" tabindex=\"-1\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eNote\u003c\/h3\u003e\n\n\u003cp\u003eArduino boards based on AVR microcontrollers get a reset and restart sketch execution each time the Serial Monitor of the Arduino Software (IDE) is opened. This is also the mechanism used to upload sketches to these boards. This board is different: when the Zero is connected through the Programming Port and you open the Serial Monitor, the board does not automatically reset and the sketch loaded keeps running. To restart the sketch you need to press the reset button on the board itself.\u003c\/p\u003e\n\n\u003ch3\u003eGetting Started\u003c\/h3\u003e\n\n\u003cp\u003eIn the \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/www.arduino.cc\/en\/Guide\/ArduinoZero\" tabindex=\"-1\"\u003eGetting Started section\u003c\/a\u003e, you can find all the information you need to configure your board, use the \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/www.arduino.cc\/en\/Main\/Software\" tabindex=\"-1\"\u003eArduino Software (IDE)\u003c\/a\u003e, and start to tinker with coding and electronics. To keep your Zero's Bootloader up to date, the \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/www.arduino.cc\/en\/Tutorial\/ZeroBootloaderUpdate\" tabindex=\"-1\"\u003ethe Update Procedure\u003c\/a\u003e explains what you should do each time there is a new Arduino SAMD Boards release.\u003c\/p\u003e\n\n\u003ch3\u003eNeed Help?\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOn the Software \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/forum.arduino.cc\/index.php?board=98.0\" tabindex=\"-1\"\u003eon the Arduino Forum\u003c\/a\u003e\n\u003c\/li\u003e\n\t\u003cli\u003eOn Projects \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/forum.arduino.cc\/index.php?board=3.0\" tabindex=\"-1\"\u003eon the Arduino Forum\u003c\/a\u003e\n\u003c\/li\u003e\n\t\u003cli\u003eOn the Product itself through \u003ca data-tabindex-counter=\"6\" data-tabindex-value=\"none\" href=\"https:\/\/store.arduino.cc\/store-support\" tabindex=\"-1\"\u003eour Customer Support\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Arduino","offers":[{"title":"Default Title","offer_id":52450375958860,"sku":"ABX00003","price":40.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/4191\/4282\/files\/ABX00003_03.front.jpg?v=1769437742","url":"https:\/\/store.oniudra.cc\/de-int\/products\/arduino-zero","provider":"EU Test Store","version":"1.0","type":"link"}